– Keep cabinet surfaces dry.
– Quick temperature changes and excessive moisture can be harmful to the cabinet finish and overall cabinet stability.

– To remove dust, use a soft, lint-free cotton cloth to wipe down all exterior and interior surfaces.

Use a soft, lint-free cotton cloth dampened with a mild detergent or soap, and warm water.
– For best results, use a “blotting” action rather than a wiping motion when cleaning.
– Dry surfaces immediately with a soft, lint-free cotton cloth.
– Avoid using a dish cloth or sponge – Harsh detergent residues may harm finishes.
– Avoid ammonia-based cleaners and soaps with dye.

– Food spills and grease will come off more easily if they are removed promptly.
– Wipe up spills and water spots immediately with a lint-free cotton cloth so moisture is not absorbed into the cabinetry.
– Check the areas around the sink and dishwasher to make sure that water and detergents do not dry on thecabinet surface.
– Do not leave printed materials (newspapers, magazines, etc.) on the cabinet surface. The printing ink can bleedinto the cabinet finish.

– Avoid draping wet or damp dish towels over doors of the base cabinets.
– Do not attach towel racks to the interior of cabinet doors.
– Use trays under potted plants to catch excess water.
– Avoid placing small kitchen appliances where the heat or steam is directed onto cabinet surfaces.
– Always protect wood surfaces by using hot pads under hot items

– Never use scouring pads, steel wool, wire brushes or powdered cleaners.
– Do not allow oven cleaner to touch any part of the cabinet.– Avoid sliding objects across the cabinet surface.
– Be careful with knives and other sharp objects that can damage the cabinet surface.
– When in doubt of a cleaner’s suitability, don’t use it. Harsh cleaners and detergents may scratch and penetrate the surface, allowing food or moisture to enter and cause deterioration of the finish. Never leave a cloth moistened with cleaners on a cabinet surface for any length of time.

– Use a household glass cleaner with a soft, clean cloth.
– Apply the glass cleaner directly to a cloth rather than the glass or mirror.
– Avoid excess glass cleaner running into cabinet joints.
– Ammonia should never be used full strength.